Tutorials

Setup:

• Download and install Fly-by-Wire on a compatible iPhone
• Download and install Infinite Flight on a separate device
• Make sure both devices are connected to the same Wi-Fi network
• Run Infinite Flight. Make sure Settings -> General -> "Enable Infinite Flight Connect" is checked.
• Open Fly-by-Wire and press Reconnect. Within 10 seconds, a message telling you that you are connected to Infinite Flight should appear.
• Configure axes in Infinite Flight > Settings > Controls

Yoke:

• Hold the device horizontally in both hands, in a traditional yoke-like fashion.
• Move the device to get a feel for the accelerometer pitch and roll.
• Buttons can only be pressed when they are allowed. If you're on the ground, or in a plane with no spoilers, these buttons won't work.
• Reverse thrust only toggles when you are on the ground with the throttle at 0. Advance the throttle with reverse enabled to reverse.
• Touch and drag on the camera to move the view. Tap once to cycle views, tap and hold to toggle the HUD.
• Have fun!

Joystick:

• Hold the device vertically in your right hand, with the volume buttons facing away from you.
• Move the device to get a feel for the accelerometer pitch and roll.
• Touch and drag on the camera to move the view. Tap once to cycle views, tap and hold to toggle the HUD.
• Have fun!